It has P0101 through P0741. Is there some other place that I am not looking for it? 
Emissions="System Not Ready" Please Help!
Thread Starter
TECH Resident
Joined: Mar 2004
Posts: 759
Likes: 0
From: Lynnwood, WA
Emissions="System Not Ready" Please Help! Ok guys, I need some help. My car is a 2001 ws6 I have SLP LTs and a FM11 cam. I have HPTuners and cannot get the system readiness tests to say complete so I can pass emissions. I have done the GM drive cycle 3 times over the last 2 days and I can't figure it out. 
I am getting P1416 and don't know where in HPTuners the code is located to set that one to No Error Reported. Am I overlooking something? Do I just need more time driving? I am more than willing to email my tune to someone if that would help.
Thanks for your help.
I am getting P1416 and don't know where in HPTuners the code is located to set that one to No Error Reported. Am I overlooking something? Do I just need more time driving? I am more than willing to email my tune to someone if that would help.
Thanks for your help.
This can be set to 3 - No Error Reported to pass emissions. Just go to Engine Diag/DTC's and scroll down to P1416 and select the error mode to 3. Also, leave the SES checked. Make sure P1415 is the same as well.
the drive cycle isn't anything that is affecting your car...it won't help you. I will look at p1416 in my efi live and let you know tomorrow....
if you search my name ZL1Killer and look for emissons posts...you will find some info..
also if you go to www.efilive.com ...follow this link
http://forum.efilive.com/showthread.php?t=2162
if you search my name ZL1Killer and look for emissons posts...you will find some info..
also if you go to www.efilive.com ...follow this link
http://forum.efilive.com/showthread.php?t=2162
Trending Topics
I had the full DTC list with 2.0.17 and with the prior versions. Can you send me your file to twelvesecta@yahoo.com and I will take a look at it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I looked at his file and I have never seen this. All other *.HPT files have the entire list of DTC's from P0101 to U1301. His file only goes up to P0741. Obviously, he cannot disable those DTC's. Still trying to figure this one out.............
Originally Posted by Blacker
I looked at his file and I have never seen this. All other *.HPT files have the entire list of DTC's from P0101 to U1301. His file only goes up to P0741. Obviously, he cannot disable those DTC's. Still trying to figure this one out.............
Something is not right then. I have 01 hpt. Send me the file if you'd like. stlvortac@aol.com
Thread Starter
TECH Resident
Joined: Mar 2004
Posts: 759
Likes: 0
From: Lynnwood, WA
Originally Posted by SmokingWS6
Something is not right then. I have 01 hpt. Send me the file if you'd like. stlvortac@aol.com
Could you just write a stock 2001 TA M6 HPT file to the PCM and then, modify that one? You could go to the dealer and have them rewrite the stock PCM with the GM file using TECH II. I wonder if the current file is corrupt and is not showing all accessable tables.
Originally Posted by SmokingWS6
Disable all O2, O2 heater, cat, evap, egr, air codes and readyness status will read pass when you turn the key on after flashing it.
Once someone finds out how this works we might as well make a sticky or something about it, as more and more people are going SD and they are going to be asking about Passing inspections