RTT bug with new HPT?
#22
Originally Posted by Magnus
Unless you are changing many cells at once, this is not an issue.
How many cells are we talking here? Sorry for the dumb question, I have not used it yet.
#23
Originally Posted by Greg Fell
HPT has identified this as a slight flaw in their software.
From HPT....
We have a small bug in the scanner. You will need to change your cylinder volume in the editor to 0.71249 for a 5.7L
The scanner defaults to 5.7L, and that volume number is used to calculate the % for the VE table. You can change the value back to the correct cylinder volume when you are done with RTT. The cylinder volume is only used on the cranking VE table, so it will not affect your main VE tuning.
From HPT....
We have a small bug in the scanner. You will need to change your cylinder volume in the editor to 0.71249 for a 5.7L
The scanner defaults to 5.7L, and that volume number is used to calculate the % for the VE table. You can change the value back to the correct cylinder volume when you are done with RTT. The cylinder volume is only used on the cranking VE table, so it will not affect your main VE tuning.
Originally Posted by Super Sport X2
I'm doing it now and it will go into whatever beta software is available in a week or so.
-Ken
-Ken
#28
Originally Posted by foff667
http://www.hptuners.com/forum/showth...2061#post62061
"It was fixed in a beta version of 2.1.13"
as per Keith.
"It was fixed in a beta version of 2.1.13"
as per Keith.