BCM Replacement 2000 Yukon Xl - Does it need reprogramming?
10-19-2006 | 09:37 PM
#1
Thread Starter
Staging Lane
Joined: Mar 2003
Posts: 51
Likes: 0
From: Milwaukee Wisconsin
BCM Replacement 2000 Yukon Xl - Does it need reprogramming? I know this is a BCM, not a PCM question, but maybe someone can help.
I need to replace the BCM on my 2000 yukon xl.
I have found a replacement, also from a 2000 yukon xl.
Does anyone know if I need to have any programming done to the new BCM when i replace my old one???
Thanks in advance!!!
I need to replace the BCM on my 2000 yukon xl.
I have found a replacement, also from a 2000 yukon xl.
Does anyone know if I need to have any programming done to the new BCM when i replace my old one???
Thanks in advance!!!
10-19-2006 | 10:02 PM
#2
On The Tree
Joined: Dec 2005
Posts: 160
Likes: 0
From: Cooper City, FL
Not the exact same application, but I had to replace mine, and after finding one that matched up with my ignition key, I simply installed it and it worked.
I would assume if the new BCM you got does not match your key, it will require reprogramming.
Good luck.
I would assume if the new BCM you got does not match your key, it will require reprogramming.
Good luck.
10-20-2006 | 09:17 AM
#3
Yes it will need programmed, Also a relearn of the security system will need to be done. Every truck is different with different options. That is why programming is necissary. something may or may not work.
