Need help with VE and Timing Tables
Thread Starter
Teching In
Joined: Feb 2006
Posts: 9
Likes: 0
From: Dublin, CA
Need help with VE and Timing Tables I finally got my beast running. Its safe, but far from properly tuned. I am running an LS1 with Ported and Polished 5.3 heads, Patriot Double Valve Springs, and a Texas Speed 233/239 cam with .603" lift.
It runs on 100 unleaded, and is managed by a TEC3r. I have the IAC running and an AEM UEGO running and plumbed into the TEC.
I am hoping someone might have a similar setup and could share with me their VE and Spark tables. Anyone out there? thanks!!
It runs on 100 unleaded, and is managed by a TEC3r. I have the IAC running and an AEM UEGO running and plumbed into the TEC.
I am hoping someone might have a similar setup and could share with me their VE and Spark tables. Anyone out there? thanks!!
