Having problems getting EFI to read AFR

Reply Subscribe

Thread Tools

Search this Thread

Dec 11, 2006 | 03:31 PM

billyjo

Thread Starter

On The Tree

Joined: Dec 2005

Posts: 126

Likes: 0

Having problems getting EFI to read AFR

Since EFI is reading a different AFR than my LM1 do I need to change the values in the sae_generic.txt from what I have which is this:

*CLC-00-928
V 0.0 5.0 .1 "{EXT.AD1}"
AFR 10.0 30.0 .1 "{EXT.AD1}*10"
*CLC-00-929
factor 0.0 2.0 .1 "{CALC.AFR_LM11.AFR}/{GM.AFR}"
*CLC-00-930
V 0.0 5.0 .1 "{EXT.AD2}"
AFR 10.0 30.0 .1 "{EXT.AD2}*10"
*CLC-00-931
factor 0.0 2.0 .1 "{CALC.AFR_LM12.AFR}/{GM.AFR}"

To this which I found here during a search http://forum.efilive.com/showthread....highlight=Lm-1
Which is this:

*CLC-00-928
V 0.0 5.0 .1 "{EXT.AD1}"
AFR 10.0 20.0 .1 "({EXT.AD1}*1.9936)+ 9.9832"
*CLC-00-929
factor 0.0 2.0 .1 "{CALC.AFR_LM11.AFR}/{GM.AFR}
*CLC-00-930
V 0.0 5.0 .1 "{EXT.AD2}"
AFR 10.0 20.0 .1 "({EXT.AD2}*1.9936)+ 9.9832
*CLC-00-931
factor 0.0 2.0 .1 "{CALC.AFR_LM12.AFR}/{GM.AFR}
__________________

Any help is greatly apprecaited.

Thanks,

Bill