CALL911

iTrader: (17)

I, like most other forced induction LT1's am tuned on a maxed out MAF. I recently found that LPE has designed a MAF that combats the maxing out that the stock MAF's get. Would it be in my best interest to buy one for my tune I am having done this summer? Or am I just as well off knowing my new tune will also max out my MAF, and having it tuned like before?

Here's the link to the LPE MAF > http://www.lingenfelter.com/store/lp..._lpe-4232.html

NoGo

iTrader: (2)

Odds are you are up against the PCM hard limit for air flow not the MAF hz limit (well past).

I would just stick with the MAF that you are using now and continue to adjust the a/f according PE.