Abs Inop, Brake Light, Tcs
03-03-2007, 09:30 AM
#3
11 Second Club
iTrader: (4)
Join Date: Jun 2006
Location: mcallen tx
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
i have heard that the sensor on the back of the front brake rotors can go bad. i say chek the wiries and make sure they didnt get cut or damaged. there is one on the differential but i think that one will only make the abs inop go on. hope it helps
03-04-2007, 03:55 PM
#7
On The Tree
Join Date: Aug 2006
Location: okc, ok
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
well i dont have tcs on my car. but my "brake" light and "abs inop" lights are both on. sounds like im having the same prob. also though...mine doesnt like to start for some reason. i thought that the abs inop light was like a back up to the "ses" light? thanks guys
Trending Topics
08-05-2007, 11:19 PM
#11
On The Tree
iTrader: (5)
Join Date: Feb 2006
Location: huntington beach CA
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Imhaing this problem toor ight now, I dont have any of those things you mentioned but I do have alot of audio stuff so where was your ground problem exactly?
08-06-2007, 08:28 PM
#13
Could a gear and not having the speedo adjusting, or running a slick maybe cause it? my traction control light doesn't come on, but abs inop, and brake light come on while crusing at highway speeds for a while. It never did this before, but i just did a 4.10 gear, and mt et streets.
If the car is going slower like 45 and under, it never comes on. Thanks, Chris
If the car is going slower like 45 and under, it never comes on. Thanks, Chris
08-07-2007, 10:30 AM
#14
TECH Fanatic
iTrader: (1)
Join Date: Aug 2005
Location: Galveston, TX
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TAQuickness
I've also seen it be the result of loose grounds - particularly the one on the back of the left cylinder head.
