Diablosport Predator plug wire
Thread Starter
Joined: Dec 2003
Posts: 667
Likes: 1
From: League City, TX.
Diablosport Predator plug wire I have had this predator for a couple of years now. I use it just to check codes. A wire seems too have come loose, so I am getting no power. Blue and red wire are still connected. Anyone know where the rest of the wires go(yellow, brown, pink, gray) This is for a GM 1999-2002 F-body. Thanks
Thread Starter
Joined: Dec 2003
Posts: 667
Likes: 1
From: League City, TX.
Lighter fuse was ok. Perdator does not power on through the ODB port. I noticed there was some wires in the base of the unit that came loose. I do not know what position they go in.
Last edited by Caribe; Jun 9, 2007 at 09:08 PM.
TECH Enthusiast
Joined: Jul 2006
Posts: 747
Likes: 0
From: sofla
Originally Posted by Caribe
Lighter fuse was ok. Perdator does not power on through the ODB port. I noticed there was some wires in the base of the unit that came loose. I do not know what position they go in.
If so, the repairs are free, just go to the website and fill out the RMA request form. If there is no proof of purchase, there will be a $99 fee.
Thread Starter
Joined: Dec 2003
Posts: 667
Likes: 1
From: League City, TX.
I am the original owner, no receipt. I am over in Guam. With shipping and the $99.00 it is not worth it since I only use it as a code reader and basic scan. I have a custom dyno tune. That is why I just wanted to know which wires go where. Red and Blue are intact it looks like the brown wire came loose.
