2 lc1's + 2 vehicles + 1 eio
Thread Starter
Joined: Jul 2003
Posts: 1,290
Likes: 14
From: Wellesley, MA
2 lc1's + 2 vehicles + 1 eio so i recently picked up 2 lc1 widebands to put in my car/truck.. I'm interested in running them in a narrowband/wideband configuration, but also want to be able to hook up both to my hptuners.. i've been referencing this source here on how to hook it up
http://www.audiohelix.com/tuning-documents/lc1/lc1.htm
instead of running all grounds to eio i could run them to chassis ground, and then just run the heater ground to the battery.. and leave a wire run into the car to tap into the eio when i want to use it? from this diagram it seems like the eio has to be in the car all the time, i need to be able to move it amongst vehicles.
Any help would be appreciated!
http://www.audiohelix.com/tuning-documents/lc1/lc1.htm
instead of running all grounds to eio i could run them to chassis ground, and then just run the heater ground to the battery.. and leave a wire run into the car to tap into the eio when i want to use it? from this diagram it seems like the eio has to be in the car all the time, i need to be able to move it amongst vehicles.
Any help would be appreciated!
Thread Starter
Joined: Jul 2003
Posts: 1,290
Likes: 14
From: Wellesley, MA
yes, but without the eio plug hooked up to the mpvi it wouldn't be grounded...thus the wideband wouldn't be working, i don't want to have to move the mpvi around everytime i drive something different
