PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

Conversion wont start

Thread Tools
 
Search this Thread
 
Old 09-19-2007 | 06:30 PM
  #1  
blazerboy72's Avatar
Thread Starter
On The Tree

iTrader: (9)
 
Joined: Oct 2005
Posts: 139
Likes: 0
From: GA
Default Conversion wont start

Will vats keep a starter from engaging? My fuel pump will come on and run but the starter doesnt do anything. Could it be vats keeping it from working?
Old 09-19-2007 | 08:23 PM
  #2  
Schitzo's Avatar
TECH Enthusiast
iTrader: (6)
 
Joined: Feb 2005
Posts: 716
Likes: 2
From: Minneapolis MN
Default

No.VATS does not affect the starter. It cuts fuel and spark. Check your wiring to the starter and also that the batt is fully charged
Old 09-19-2007 | 10:28 PM
  #3  
98turbls1's Avatar
TECH Fanatic
iTrader: (17)
 
Joined: Nov 2005
Posts: 1,927
Likes: 2
From: Central Oklahoma
Default

What kind of conversion did you do??? Possibly a t56 to auto??
Old 09-20-2007 | 05:12 AM
  #4  
blazerboy72's Avatar
Thread Starter
On The Tree

iTrader: (9)
 
Joined: Oct 2005
Posts: 139
Likes: 0
From: GA
Default

It is a 04 5.3 into a 93 4Runner with a th400.
Old 09-20-2007 | 03:29 PM
  #5  
98turbls1's Avatar
TECH Fanatic
iTrader: (17)
 
Joined: Nov 2005
Posts: 1,927
Likes: 2
From: Central Oklahoma
Default

Was the pcm for a M6 before?? I ask because I just ran through something like this when I put my TH400... I had to do a "tricky" wiring strategy.. haha.. not really,it was really simple but I had to splice two wires together for the starter to work... It's because the clutch basically completes the circuit when it was pushed in and without the clutch pedal it wouldn't make the circuit.. If this sounds like what's happening to you let me know so I can tell you how to fix it..




All times are GMT -5. The time now is 04:36 AM.