need help with tune for "BabyCam"
02-03-2008, 10:20 AM
#1
On The Tree
Thread Starter
Join Date: Jun 2005
Location: Germany
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
need help with tune for "BabyCam" just finished my cam swap today and fired the motor up for the first time.
It started immediately and idles smoothly and sounds even better.
I'm using LS1edit, what changes do I have to make for this cam:
rpm range----Grind No.---in.--ex.--in.---ex.---in.---ex.--LSA
1300 to 6300 XR269HR -269 -273 -216 -220 -.525 -.532 -114°
I also installed YellaTerra 1.8ratio rockers so lift should be in. .556 ex. .563
so, what tunes do I need to change to make this cam work a 100%?
It started immediately and idles smoothly and sounds even better.
I'm using LS1edit, what changes do I have to make for this cam:
rpm range----Grind No.---in.--ex.--in.---ex.---in.---ex.--LSA
1300 to 6300 XR269HR -269 -273 -216 -220 -.525 -.532 -114°
I also installed YellaTerra 1.8ratio rockers so lift should be in. .556 ex. .563
so, what tunes do I need to change to make this cam work a 100%?
Last edited by LS1AC-Cobra; 02-03-2008 at 10:26 AM.
