A4-m6
A4-m6 Need to tune my car for the M6 that has been installed. The car is still running on the tune for the 3600 stalled A4. Whats the best way to tune it for the M6 with HP Tuners? Better to load in a stock M6 file and layer my stuff into it? Or just change certain items in my present program? Thanks.
doesn't look like much of a power difference since the high octane wot timing cells are identical between the two files I have 1 auto, 1 manual, same operating system. PE tables are all identical as well.
There are hundreds if not thousands of differences between the auto & manual file though so you might want to flash it with a stock manual file to get you where you need to be via tech 2 or otherwise.
There are hundreds if not thousands of differences between the auto & manual file though so you might want to flash it with a stock manual file to get you where you need to be via tech 2 or otherwise.
doesn't look like much of a power difference since the high octane wot timing cells are identical between the two files I have 1 auto, 1 manual, same operating system. PE tables are all identical as well.
There are hundreds if not thousands of differences between the auto & manual file though so you might want to flash it with a stock manual file to get you where you need to be via tech 2 or otherwise.
There are hundreds if not thousands of differences between the auto & manual file though so you might want to flash it with a stock manual file to get you where you need to be via tech 2 or otherwise.
Coming from a stalled auto, I wasnt used to life below 4000rpms. 
