Pro-M MAFs?
Thread Starter
Moderator
iTrader: (11)
Joined: Mar 2002
Posts: 12,604
Likes: 7
From: East Central Florida
Pro-M MAFs? Saw in some catalog or mag, a series of MAFs by Pro-M for
GM 3- and 5-wire, 75mm and 85mm sizes. What caught my
interest was that they claimed to read within 2% of factory
cal curve and a MAF table came with. First time I've seen
anyone do that.
Seems a little pricey for a factory-cal descreened known
quantity like, oh, a Z06 MAF but 3 times the price?
But it is maximally hogged out going by the pic. And you've
got to like an actual cal sheet. Or facsimile even. Be
interested to know if the accuracy is as indicated.
GM 3- and 5-wire, 75mm and 85mm sizes. What caught my
interest was that they claimed to read within 2% of factory
cal curve and a MAF table came with. First time I've seen
anyone do that.
Seems a little pricey for a factory-cal descreened known
quantity like, oh, a Z06 MAF but 3 times the price?
But it is maximally hogged out going by the pic. And you've
got to like an actual cal sheet. Or facsimile even. Be
interested to know if the accuracy is as indicated.
Brought up from the Dead JimmyBlue,That is a bunch of **** the 2% I mean.My car was dyno tuned and scaled with a 85 mm zo6 maf and it isn't even close....It sure would flow the air I need on my 408 if I could get a scale for it.It is a really nice machined piece....
Scott
Scott
