P0106 Code? MAP Problem?
Thread Starter
11 Second Club
iTrader: (27)
Joined: May 2002
Posts: 2,397
Likes: 0
From: East Palestine, OH - USA
P0106 Code? MAP Problem? This is the first time i've set this code, any Ideas?
Cam has been in a while and I usually set the Misfire code, not this time......
P0106 MAP/Barometric Pressure Circuit Range/Performance Problem
WTF?!?!?!?!?!
Cam has been in a while and I usually set the Misfire code, not this time......
P0106 MAP/Barometric Pressure Circuit Range/Performance Problem
WTF?!?!?!?!?!
Thread Starter
11 Second Club
iTrader: (27)
Joined: May 2002
Posts: 2,397
Likes: 0
From: East Palestine, OH - USA
Re: P0106 Code? MAP Problem? Well, mine started idling VERY rough and surging. The SES light came on at the same time my ASR/TCS light went off.
I cleared the code and backed it into the garage, hasn't returned yet.
I cleared the code and backed it into the garage, hasn't returned yet.
Thread Starter
11 Second Club
iTrader: (27)
Joined: May 2002
Posts: 2,397
Likes: 0
From: East Palestine, OH - USA
Re: P0106 Code? MAP Problem? I never threw this code until I did the VE tweak to solve the hotstart issue. That's why I asked in the other thread how to "tweak" the VE properly. What needs monitored, etc...
My posts are here: https://ls1tech.com/threads/showflat...=7&fpart=1
The SES light came on while the car was running after a long sit in traffic. The SES light came on at the same time my TCS/ASR light went off.
More posts here: https://ls1tech.com/threads/showflat...amp;PHPSESSID=
My posts are here: https://ls1tech.com/threads/showflat...=7&fpart=1
The SES light came on while the car was running after a long sit in traffic. The SES light came on at the same time my TCS/ASR light went off.
More posts here: https://ls1tech.com/threads/showflat...amp;PHPSESSID=
The code is set at start-up with large cams.
You can use the VE table tune to eliminate this problem.
You can use the VE table tune to eliminate this problem.
