timming
Thread Starter
Teching In
Joined: Jun 2008
Posts: 28
Likes: 0
timming hi guy,s i have a ? on tha timming for my trucks i have a 5.3 with cam and heads and 150 shot nos, and curently i em running 20 degrees and i em not making any horsepower on motor and what do you guys ricommend
Last edited by gtrucks; Jun 18, 2008 at 07:23 AM.
Teching In
Joined: Feb 2005
Posts: 35
Likes: 0
From: North America
Not trying to be a smart-***, but I'd recommend a spelling and/or typing class. Beyond that, what kind of power is the truck making? I have a 2002 Silverado 5.3 and it made 268 at the wheels. Only mods are high flow cats, low restriction muffler, ported throttle body and tuning. Don't know if that's good or bad, but I think bone stock 5.3s put out about 240-245 at the wheels. Maybe some else has some stock dyno numbers.
Thread Starter
Teching In
Joined: Jun 2008
Posts: 28
Likes: 0
Not trying to be a smart-***, but I'd recommend a spelling and/or typing class. Beyond that, what kind of power is the truck making? I have a 2002 Silverado 5.3 and it made 268 at the wheels. Only mods are high flow cats, low restriction muffler, ported throttle body and tuning. Don't know if that's good or bad, but I think bone stock 5.3s put out about 240-245 at the wheels. Maybe some else has some stock dyno numbers.
Teching In
Joined: Feb 2005
Posts: 35
Likes: 0
From: North America
Your spelling's great now, except for the extra "i" in nitrous. Your truck is making 348 at the wheels and it's stock except for a nitrous tune???? That's amazing-- if I understand you correctly, it's making more at the wheels than the factory rating at the crank. Wish mine did that.
Thread Starter
Teching In
Joined: Jun 2008
Posts: 28
Likes: 0
hi guy,s i have a ? on tha timming for my trucks i have a 5.3 with cam and heads and 150 shot nos, and curently i em running 20 degrees and i em not making any horsepower on motor what do you guys ricommend
As you can see on my first post it's cam and heads with a nitrous tune.
Can you give any advise on a nitrous timming or are you just making comments
As you can see on my first post it's cam and heads with a nitrous tune.
Can you give any advise on a nitrous timming or are you just making comments
Last edited by gtrucks; Jun 18, 2008 at 07:23 AM.
