blue98coupe

thanks

SPS_WS6

In what respect do you see or read COT?

horist

COT - Catalytic Over Temp... not sure what it does but it monitors to make sure the cats aren't burning up... not sure what the effects of it are though.

93LS1RX7

iTrader: (8)

It dumps fuel to help cool the cats down. It hurts performance but saves the cats.

blue98coupe

thanks ,what about torque managment ?? do I just zero out the table ???

93LS1RX7

iTrader: (8)

I think most people just set it to a max torque of like 800 something you wont reach. If you are doing it to turn traction control off make sure you change those values too.

F.A.T. PERFORMANCE 01

I think you can delete tq managment by setting all of the torque reduction tables to 0 and set the max torque to 639. That is what i did and it seems to work, someone please correct me if i am wrong i am still pretty new at this. Hope this helps.

Reboot

iTrader: (5)

You may also want to change the values in the spark retard limit table to a positive number. When your car shifts hard it will go into abuse mode, and use whatever value is in that table as your timing table. If it's set to 0, you will get 0 degrees of timing. This causes the car to hesitate or stumble sometimes on a m6 and reduces your timing breifly on WOT shifts in a A4 (especially with a shift kit).