BMR Tech2

iTrader: (5)

Gain superior handling and greater adjustability in your 70-73 Camaro/Firebird with a Torque Arm Suspension from BMR Suspension. This complete kit comes with an adjustable torque arm, Watts Link, torque arm cross-member, coil-over conversion cross-member, lower control arms, and all necessary mounting hardware. The torque arm is equipped with a Delrin-bushed, telescoping front mount for bind-free axle articulation and a pinion-angle adjustable rear mount. The Watts link centers the rear axle housing even if the suspension is fully extended or compressed. The BMR Torque Arm Suspension (TAS004, TAS005, TAS006) is a true bolt-in kit that can be installed without cutting or welding the floor or frame. The suspension can be unbolted and the car can easily be returned to stock if desired. Applications for 10 bolt, 12 bolt, and Ford 9”. The Ford 9” version includes a new Strange rear axle housing. Coilover shocks sold separately. Available in black hammertone or red powdercoat.
To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

ElkySS

iTrader: (6)

why would this not fit later 2nd gens?

BMR Tech

iTrader: (9)

The later model 2nd Gens have the front body mounts mounts in a slightly different location.

These body mounts are how we attach the front of the torque arm to the vehicle.

We will have a unit ready for sale for the later model cars available shortly

Paul Bell

iTrader: (9)

Is there a picture that shows the other side, the Watts link?

BMR Tech

iTrader: (9)

Hi Paul I sure do....as you can see in the images the center prop is adjustable for roll center as well as the where the end links mount to the frame are also adjustable.