problem with window not going up all the way
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
today i changed my passenger side window motor and regulator (did the drivers side a couple weeks ago) and when i was done and testing it i noticed the back of the window, near the door handle goes up all the way, but the front near the mirror does not. there is about a half inch or maybe a tad more left of the black stripping from the top of the window. its almost as id the back is somehow stopping it because i hold the top of the back down and the front will usually rise completely. i have absolutley no idea and really wanna figure this out soon cause i wanna get it fixed and over with. thanks for any help !!
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
https://ls1tech.com/forums/appearanc...-write-up.html
This helped me when today when I finished changing out my driver side motor today. My motor had already been replaced too. So my cars on at least it's 3rd driver side motor now.
This helped me when today when I finished changing out my driver side motor today. My motor had already been replaced too. So my cars on at least it's 3rd driver side motor now.