May 10, 2016, 02:34 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
- Camaro and Firebird How to Replace Power Window Actuator<br>Step by step instructions for do-it-yourself repairs.
how to replace window regulator assembly?
Thread Starter
Staging Lane
Joined: Aug 2004
Posts: 69
Likes: 1
From: Atl
how to replace window regulator assembly? OK, so my window will no longer roll down in my 02 WS6. So I bought I new window regulator assembly. Anyone know how to put one of these in? Ive replaced window assemblies on various other cars but never a TA. I was curious to see if anyone could offer me any tips or tell me how difficult it will be. Thanks much...
TECH Regular
Joined: Jan 2004
Posts: 416
Likes: 1
From: Minnesota
Its real easy. Just put it back together the same way you take it apart. Make sure you have the window in before you rivit the regulator in. I had to cut my new rivets off when I did mine because I didn't have the window all the way in the track. Don't spin the rivets when you drill them out, because it will burn the door. Get a cut off wheel if you need to.
Copy & Paste Moderator
Joined: Apr 2002
Posts: 9,764
Likes: 208
From: Eastern MA
I dont know if you still need help, but here is a thread to help you out:
https://ls1tech.com/forums/showthrea...ghlight=window
https://ls1tech.com/forums/showthrea...ghlight=window
Thread Starter
Staging Lane
Joined: Aug 2004
Posts: 69
Likes: 1
From: Atl
Thanks for all the help. I ended up replacing the pop-rivets with nuts and bolts of the same diameter (that way if i ever have to replace it again it wont be as difficult). It was fairly easy for the most part. I did scratch up the tint while putting the new regulator in. Thanks for all the help!
