Blu99T/A

iTrader: (5)

Planning on using BMR poly Strut bushings, but what about LCA's? I seen Spohn's aluminum LCA's with the rebuildable delrin balljoints. Anybody used these and what is your opinion of them?

I also looked at Pedders, but leaning towards the Spohn's b/c of the cost and the ability to rebuild the balljoints.

What has anyone had good luck with?

Blu99T/A

iTrader: (5)

What are your experiences with the newer updated OE LCA's?

Tainted

iTrader: (9)

Id go for spohns lcas and opt for the ferlin bushing is a must

M23G8GT

Can anyone here verify which 'strut bushing' I need- both these KYB and Moog look very different unless one is just a generic photo. I would assume the Moog one

http://www.partstrain.com/store/?N=0...universal:0%29

Blu99T/A

iTrader: (5)

The Moog piece is the "Strut Bushing". I would get poly though. If you are interested in poly bushings, let me know and I can direct you to a much cheaper alternative.

I got my poly strut bushings and bearings for $158 shipped.