vfntech

iTrader: (21)

Sorry, were still finishing the frame that attaches to the bottom to make it a functional bolt on,

tmiller

Any pics of one on a GTO?

Mark1si

iTrader: (4)

Not yet. I asked

vfntech

iTrader: (21)

We should have one available soon - we have someone bringing in their car towards the end of next week and should be able to take some pics then

Cape T/A

those look sweet!

hivoltagedriver

iTrader: (1)

Would love to see one on a Goat to get a better feel for it. Was it modeled on the '04 hood, or does it have the clearance built in for the '05-06 computer mounted on the drivers fender?

05JUDGE

iTrader: (26)

The 04 hood will fit an 05-06 car without clearance issues anyway so it shouldn't matter.

98PurpleT/A

iTrader: (16)

Can't wait to see it on a car.

vfntech

iTrader: (21)

Thanks guys!

We are hoping to have pictures soon - but it will probably be sometime next week at the earliest on a car.

We are making the adjustments on the hood for the computer on the 05-06 models...so our hood will accomidate all models.

Thanks!
Jeanie

1SLOCV8Z

does this hood have enough clearance in the front where the scoops would be normally on a 05/06? i have a tvs and it barely clears now.

chance575

check out team scss for their gto motor mounts. they have specific ones for maggie cars to lower the motor a bit.

hivoltagedriver

iTrader: (1)

Not all the aftermarket hoods built off of the '04 fit without clearance issues though. There have been several people with issues between the hood and '05-06 PCM. The later hoods got a notch in them to clear the computer. And I am not positive that an '04 hood will bolt directly onto a later car without dropping the computer down a little.

05JUDGE

iTrader: (26)

The only reason I made my comment is because I am running an 04 hood on my 05 GTO until I get this hood in and I have no issues. I can however see how a hood built off the 04 might have issues, depending on how the hood was built.

1SLOCV8Z

I have them on the car now but it is still close I don't have the standard pulley on my car its bigger 3.4 I'm overdriven in the rear with cog pulleys and I have a 8" overdrive balancer in the front

onesickxp

iTrader: (1)

They look good , and no the one on my car is not there hood molded a 67 chevelle cowl on mine.

silver04goat

any updates on this? i assume the hood is for sale now? Any pics of one on a gto? I have a 04 but i know someone with a 05 that has my 04 hood and he didnt have any problems and i have his 05 hood on my 04. This hood looks really promising. Love the aggressive look of it

BoostedLT5

iTrader: (1)

I have the hood on my car, search my name over on the gto forum for pictures.

Canada

iTrader: (2)

If you dont mind spending some extra money have them combine the wide version that is 4.5" tall with their 3" tall cowl. Wish they would just make a 3" wide hood and not make it a custom build hood. 3" tall wide cowl looks sexy.

Lil'Felt

I love my 4.5in looks great and fits perfect.

bnvus

link?