Tell me your exhaust set up
#1
Tell me your exhaust set up
I have an 04 goat a few mods but I'm mainly going to talk about the exhaust. I just Had glasspack Cherry Bomb Mufflers installed and it roars. (Mildly Satified) I'm thinking of going with an H pipe and Pacesettrs coated LT's, gonna cut a port on the right for side by side exhaust and throw dual 3.5" tips on it...should really roar then (Will be Completely Satified) What do you guys have? and do you have any opinions about my future set up?
#2
Bassani here. Great at and just off idle. WOT = too loud. Thinking of putting some Flowmasters back under the car and removing the Bassani muffler at the rear. Bassani comes with a X-pipe.
#6
Staging Lane
Join Date: May 2012
Location: Cape Coral, FL
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
I cut the right side of my bumper and installed dual oval black tips. I got shorty JBA headers, JBA mids, h-pipe, and spintech pros. Im really happy with the setup
Trending Topics
#8
Teching In
Join Date: Jan 2012
Location: Worcester, MA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
ARH 1 7/8 to 3" spintech prostreet 6000's. I had an x pipe on it and loved it. Now its straight piped because the x-pipe would fit with the 4" driveshaft; I like it but dont love it. I will be going back to the x-pipe setup this winter.
#12
My goat has
Kooks 1-7/8 inches x 3 inches long tube 304 grade stainless steel header with 3 inches inlet.
high flow race catted and off-road connection pipes. I use the none catted pipes but the video is with catted pipes and Cam.
Magnaflow Competiton Series Catback, 5 x 14in. Muffler; 3.0in. Tubing; 4.0in. Polished Stainless Steel
Kooks 1-7/8 inches x 3 inches long tube 304 grade stainless steel header with 3 inches inlet.
high flow race catted and off-road connection pipes. I use the none catted pipes but the video is with catted pipes and Cam.
Magnaflow Competiton Series Catback, 5 x 14in. Muffler; 3.0in. Tubing; 4.0in. Polished Stainless Steel
#13
My goat has
Kooks 1-7/8 inches x 3 inches long tube 304 grade stainless steel header with 3 inches inlet.
high flow race catted and off-road connection pipes. I use the none catted pipes but the video is with catted pipes and Cam.
Magnaflow Competiton Series Catback, 5 x 14in. Muffler; 3.0in. Tubing; 4.0in. Polished Stainless Steel
http://youtu.be/g8okWLNpodk
Kooks 1-7/8 inches x 3 inches long tube 304 grade stainless steel header with 3 inches inlet.
high flow race catted and off-road connection pipes. I use the none catted pipes but the video is with catted pipes and Cam.
Magnaflow Competiton Series Catback, 5 x 14in. Muffler; 3.0in. Tubing; 4.0in. Polished Stainless Steel
http://youtu.be/g8okWLNpodk
#14
As stupid as this may sound, my turner who ordered this custom grind to his spec ask if I would not tell the world what it is. It's is the smallest one he makes for the LS2 but has good power in the mid-range for the street and daily driven cars.
It is still nice down low and in traffic with a twin disc metal plate clutch. However, the car detailers find the car hard to drive.
Made 450rwhp with Fast 102, Cam, Full Exhast, K&N intake
Dyno
It is still nice down low and in traffic with a twin disc metal plate clutch. However, the car detailers find the car hard to drive.
Made 450rwhp with Fast 102, Cam, Full Exhast, K&N intake
Dyno
#15