CT'S GTO

excellent craftmanship guy's. it takes alot to do a project like this, keep us updated on the work it looks awesome.

2010cam

man how much for all that work

EPP

iTrader: (22)

Thanks, you should stop by and check it out.


Thanks, will do on the updates.


I'm not sure where I would start at on figuring it out. Cody had us install our blower cam and the D-1SC, etc, then he brought it back for us to build the engine, transmission, rear, etc plus we're jumping up to the larger F-1C and a larger intercooler system, fuel system, etc. Bob

EPP

iTrader: (22)

Tim Irwin from Moser Engineering stopped by our shop today to check out the Moser M9 we're installing in this GTO. Tim is the guy who designed the Moser M9 and we wanted his input on our ideas for putting this rear into production, to sell to people looking for a stronger rear-end. Tim had a lot of good ideas for us, and he took the rear back to Moser with him to make a jig fixture for it.

The new Moser M9 rear for the GTO will be sold only through us at EPP. I'll have pricing together very soon. Bob

RacerXLs1

iTrader: (14)

[QUOTE=Exotic Performance Plus;10898450]Thanks, you should stop by and check it out.



I will have to get James to bring me there.

EPP

iTrader: (22)

[QUOTE=RacerXLs1;10899439]

Sounds good! Bob

brokenfly

it will be nice to see that setup doing hard launches off a healthy stall or a brake...sooner or later i am going to need one down the road...

EPP

iTrader: (22)

My Camaro has done a 1.29 60 ft with the same basic combination. Bob

brokenfly

i hear ya...there is no substitute for the 9 inch...well,maybe there is but for all practical,proven results it's my choice when i do make the change to one...

just a few more good pay days and i will be ready for a kit...

EPP

iTrader: (22)

The nice thing about the Moser M9 is that it is lightweight, it weighs the same amount as the F Body 10 bolt. Bob

RacerXLs1

iTrader: (14)

Can i borrow it for a couple years LOL

EPP

iTrader: (22)

I doubt Cody would appreciate that! lol Bob

JoeyD

iTrader: (20)

Update????

TurboAv

iTrader: (6)

I need this bad. I just put a TH400 with a transbrake and a 4000rpm stall(NA) in my goat. When I hit it with the juice it should stall about 4600-4800. It would be sweetness to launch off the brake with the juice flowing.

hawkls7

Well done guys about time ! Can''t wait till it is put to its test on the track . Very intrested how it will feel and handle , that set up bob is my next option ,have you got a discounted rate to Australia.

JoeyD

iTrader: (20)

So Bob - what's going on with the Moser set up? Been awhile.

EPP

iTrader: (22)

Moser is working on the jib fixture for the GTO M9 rear right now. We should have pricing this coming week. Thanks for being patient. Bob

JoeyD

iTrader: (20)

So any update on the 9" SRA?

1INSANEGTO

iTrader: (13)

Bob any idea on pricing? You know i am drooling about this.

JoeyD

iTrader: (20)

So Bob, what's the story??????