Billet Wheels spacers?
Thread Starter
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Billet Wheels spacers? Anyone know where I can get the good Billet Wheels spacers that slide over the studs. Not the bolt on's
I have seen them on a few road race cars is why I am asking here
I know I need two 14mm-16mm so far
I have seen them on a few road race cars is why I am asking here
I know I need two 14mm-16mm so far
TECH Addict
Joined: Nov 2001
Posts: 2,662
Likes: 1
From: LaConner WA
Ellis I typically see these spacers on big brake kits. Mov'it and Stoptech both stock them I believe. The spacers on my Prospeed kit are aluminum, they seem to be fine after all this time. This kit is no longer made though. I know that the Mov'it kits come with steel spacers, not sure on the Stoptechs
TECH Addict
Joined: Nov 2001
Posts: 2,662
Likes: 1
From: LaConner WA
Originally Posted by roy
Hey RH
Unless they changed stuffed the Movits are Billet Alu.
Try H&R Sport Spring, they also have Billet Spacers. Hope your not RR with those rims
Unless they changed stuffed the Movits are Billet Alu.
Try H&R Sport Spring, they also have Billet Spacers. Hope your not RR with those rims
Thread Starter
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Originally Posted by roy
Hey RH
Unless they changed stuffed the Movits are Billet Alu.
Try H&R Sport Spring, they also have Billet Spacers. Hope your not RR with those rims
Unless they changed stuffed the Movits are Billet Alu.
Try H&R Sport Spring, they also have Billet Spacers. Hope your not RR with those rims
I posted here becuase I have seen the spacers I am looking for on a few RR cars
Thanks guys. I surfed for hours last night to no avail. All I found were the Bolt on's and they won't work with this wheel and a 16mm spacer.
Ross Corrigan in BC used to Sell them but I can not find his addy.
TECH Resident
Joined: Dec 2001
Posts: 937
Likes: 0
From: Mehlingen, Germany
Thread Starter
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Getting there!
NHRA Regulates no more then a singal spacer per wheel. I think SCCA and other bodys are the same? So I need to find some that are 16mm thickTrying to find the slip ons so I can swap back to my Street and RR wheels with out a big hassle
Thanks Roy!
NHRA Regulates no more then a singal spacer per wheel. I think SCCA and other bodys are the same? So I need to find some that are 16mm thick
Trying to find the slip ons so I can swap back to my Street and RR wheels with out a big hassle Thanks Roy!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Staging Lane
Joined: Jun 2002
Posts: 84
Likes: 0
From: US Army germany
No problem on the spacers. Reforger 89 cool... Reforger 88 was my first. It's AWSOME, alot has changed since then. The one constant is the high speed autobahn driving 
Roy got me started running a the Hockenheim Ring last year..it's a blast 
! It's nice to be able to run the Firechicken at 130mph plus at will and not have to worry. The BEER is still OUTSTANDING 
!!
Val
Roy got me started running a the Hockenheim Ring last year..it's a blast ! It's nice to be able to run the Firechicken at 130mph plus at will and not have to worry. The BEER is still OUTSTANDING !! Val
