1984 rx7 5.3L turbo s475/th400/8.8 /E85 (sloppy style)
#402
So i sent on3 a couple of pics as they requested.
And this is what i got
I mean im not a turbo expert, but how would slag create in and out shaft play.
And to say that you cant see where the compressor wheel hit the housing is just funny.
And this is what i got
I mean im not a turbo expert, but how would slag create in and out shaft play.
And to say that you cant see where the compressor wheel hit the housing is just funny.
#409
#410
Whats weird to me is the amount of fuel it was using on 16psi. IMO it shouldve been using more. Thats what has me scratching my head.
Im debating of getting rid of the intercooler.
Im debating of getting rid of the intercooler.
#414
#419
8 Second Club
iTrader: (4)
Looks great!
FWIW you can grab some SS safety wire from harbor junk super cheap and it works great at keeping that heat wrap in place. .030 or smaller works best IMO. Some HF safety wire pliers make installing a bit easier. Then hose it down good with BBQ grill paint and it makes the wrap more rigid, almost like glue. Doesn't move at all if you wrap it careful.
FWIW you can grab some SS safety wire from harbor junk super cheap and it works great at keeping that heat wrap in place. .030 or smaller works best IMO. Some HF safety wire pliers make installing a bit easier. Then hose it down good with BBQ grill paint and it makes the wrap more rigid, almost like glue. Doesn't move at all if you wrap it careful.
Last edited by Forcefed86; 04-25-2016 at 09:45 AM.