beardWS6

iTrader: (1)

How does this compare to my stock ZL-1 blower. . Ported mouth, ported blower, snout, throttle body, and have Metco Motorsports 9.1" lower pulley ( includes innovators west damper) Metco Motorsports 2.5" blower pulley. Would the cam I have work also?
Cam specs 227/242/520/590/122+6. Would it be worth me changing and how much benefit? Thanks!

1. Roto Fab Cold Air Kit
2. ZL1 Custom Heat Exchanger with dual fans
3. Metco Motorsports 9.1" lower pulley ( includes innovators west damper)
4. Metco Motorsports 2.5" blower pulley
5. Cam specs 227/242/520/590/122+6.
6. .675 lift double valve spring kit with Ti Retainers
7. Comp cam pushrods
8. 160 degree thermostat
9. solid isolater
10. Kooks 1 7/8" headers with Catted Connection pipe
11. Metco 50 MM Idler pulley
12. Blower belt
13. Ported mouth, ported blower, snout, throttle body
14. MSD wires and NGK TR7IX spark plugs
15. Alky Control Meth injection kit
16. ID 850 fuel Injectors
17. Fully forged shortblock stock cubed.
18. ported heads

This is my current build

Bob@BruteSpeed

iTrader: (16)

With your forged engine you could go with an F-1A up to an F-1X.
Take a look at the links below and let me know if you have any questions. Give me a call for pricing. Thanks. Bob
https://www.procharger.com/gallery/1...et-camaro-ss-0
https://www.procharger.com/gallery/1...rolet-camaro-5
https://www.procharger.com/gallery/6...olet-camaro-ss

Bob@BruteSpeed

iTrader: (16)

Give me a call for great pricing. Bob

Bob@BruteSpeed

iTrader: (16)

Give me a call for great prices. Bob

Bob@BruteSpeed

iTrader: (16)

Give me a call for great ProCharger prices. Bob

Bob@BruteSpeed

iTrader: (16)

https://shop.brutespeed.com/2010-15-...stems_c644.htm
The wider 10 Rib is an option with the Stage 11 Kits. Bob

Kjduvall

Hey Bob, when's a kit coming out for a 6.6 gas 2500hd with tunning for bolt on installation. I'll lend em my truck for R/D if they need it........... 1 yr cap on time...

Bob@BruteSpeed

iTrader: (16)

I'll check and get back to you. Thanks for asking! Bob