Real Time Tuning in HPTuners ?
Check the availability for your pcm. Some don't have the ability to run 2bar and RTT. Also, make sure you are running the latest version, or a really old version of HPT. When they first did the last huge update, they left out RTT entirely. Subsequent minor updates brought it back.
^ yep you gotta have 3.2 or newer.
go into the editor and select Engine>General>Real Time Tuning and then select which parameter you'd like to tune
then go into the scanner and connect to the vehicle, a little lightning bolt on a wrench icon pops up and you can access the tables there. they are numbered 1, 2, 3 etc...
go into the editor and select Engine>General>Real Time Tuning and then select which parameter you'd like to tune
then go into the scanner and connect to the vehicle, a little lightning bolt on a wrench icon pops up and you can access the tables there. they are numbered 1, 2, 3 etc...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
Teching In
Joined: Jul 2016
Posts: 42
Likes: 0
From: Alaska
If one does a "Write Entire" with a 2BAR OS will RTT then become possible ?
.
Is it possibly the case that I first did my 2 BAR OS upgrade, 6 weeks ago while running an early 3.0 version of HPTuners, and then, after the latest upgrade to a 3.2 version I have a non-enabled RTT function, hidden, and need to perform a " Write Entire " of my LATEST TUNE in order to make the RTT function activate ?
.
Is it possibly the case that I first did my 2 BAR OS upgrade, 6 weeks ago while running an early 3.0 version of HPTuners, and then, after the latest upgrade to a 3.2 version I have a non-enabled RTT function, hidden, and need to perform a " Write Entire " of my LATEST TUNE in order to make the RTT function activate ?
Last edited by Fullpower; Sep 13, 2016 at 06:31 PM. Reason: ...
If one does a "Write Entire" with a 2BAR OS will RTT then become possible ?
.
Is it possibly the case that I first did my 2 BAR OS upgrade, 6 weeks ago while running an early 3.0 version of HPTuners, and then, after the latest upgrade to a 3.2 version I have a non-enabled RTT function, hidden, and need to perform a " Write Entire " of my LATEST TUNE in order to make the RTT function activate ?
.
Is it possibly the case that I first did my 2 BAR OS upgrade, 6 weeks ago while running an early 3.0 version of HPTuners, and then, after the latest upgrade to a 3.2 version I have a non-enabled RTT function, hidden, and need to perform a " Write Entire " of my LATEST TUNE in order to make the RTT function activate ?