HP Tuners Question - 2.24
HP Tuners Question - 2.24 As of today I can no longer switch units to Imperial in JUST one section in the editor.
The "Base Running Airflow" chart is stuck on "g/sec" while ALL else is showing Imperial. (When selecting imperial)
I can switch back and forth from Imperial to Metric just fine, but the BRAF sticks in g/sec.
Im still on 2.24.1021
Thank You for your time.
The "Base Running Airflow" chart is stuck on "g/sec" while ALL else is showing Imperial. (When selecting imperial)
I can switch back and forth from Imperial to Metric just fine, but the BRAF sticks in g/sec.
Im still on 2.24.1021
Thank You for your time.
On The Tree
Joined: Jun 2012
Posts: 122
Likes: 2
Ok i tried but ls1tech wont let the file is too big.. so if you want the hp tuners 2.24.1172.msi file skype me at the404man_Osborne
You can run 3.2 and 2.24.1172 together
and here is 2.24.1172 and do the following to allow them both to be installed
Ok to get 2.24 and 3.2 running on the same computer (and have both be fully functional), you need to do this:
1. Ok now If 3.2 is already installed, un-install it (save any files you need first)
2. Install 2.24 to the *default* installation directory
3. After its installed, manually rename the installation directory from "\Program Files\HP Tuners" to "\Program Files\HP Tuners 2.24"
4. Re-install 3.2 to the *default* installation directory.
At this point, both 2.24 and 3.2 will be installed. However, the startup shortcuts will start 3.2. You have to manually create new shortcuts to the 2.24 binaries (basically, right click on the Scanner and Editor .exe files in "\Program Files\HPTuners 2.24\VCM Suite" and click "Create Shortcut".
Oh and don't save changes to files you open with 3.2 if you want to use them again in 2.24
happy getting used to 3.2 and while still enjoying 2.24 peace
You can run 3.2 and 2.24.1172 together
and here is 2.24.1172 and do the following to allow them both to be installed Ok to get 2.24 and 3.2 running on the same computer (and have both be fully functional), you need to do this:
1. Ok now If 3.2 is already installed, un-install it (save any files you need first)
2. Install 2.24 to the *default* installation directory
3. After its installed, manually rename the installation directory from "\Program Files\HP Tuners" to "\Program Files\HP Tuners 2.24"
4. Re-install 3.2 to the *default* installation directory.
At this point, both 2.24 and 3.2 will be installed. However, the startup shortcuts will start 3.2. You have to manually create new shortcuts to the 2.24 binaries (basically, right click on the Scanner and Editor .exe files in "\Program Files\HPTuners 2.24\VCM Suite" and click "Create Shortcut".
Oh and don't save changes to files you open with 3.2 if you want to use them again in 2.24
happy getting used to 3.2 and while still enjoying 2.24 peace Last edited by the404man; Sep 14, 2016 at 02:56 AM.
If he's like me, he doesn't like incremental change if what he's using now works perfectly. I will continue to use my current tuning setup in my car, which includes using 2.24, until I'm no longer running a stock GM computer.
Trending Topics
On The Tree
Joined: Jun 2012
Posts: 122
Likes: 2
Once you take a 2.24 .hpt file and save changes with 3.0+ you can no longer use it in 2.24
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo