Wesley856

I have a 2002 ram air, I want to run the alumastar 2.0 15x10 on the rear and 15x3.5 on the front! The car is stock what backspace do I need for the back they only come 7 and 8 backspace? What should I run? Please help me!!! On the front what do I need? Thank you so much everyone I really need to know ASAP!!!

SteenH

depending on the tire size the 7.0 could work seeing as the car is a firebird. The 8 is just the opposite, you'll be tucking 1/2 inch more than most of the setups.
I really wanted to order the 15x10 Alumastar in 6"BS for my 2" narrowed per side rear, but the extra half inch is going to make it so I can't fit a 13" section width tire on. I absolutely love those wheels. Sorry I couldn't be more help. I would think SOMEBODY would have this setup. Best of luck
Edit: another option is ordering the 15x9 with the 7" BS this will be the same as a 15x10 with the usual 7.5

Wesley856

Thank you so much! I want to fill the wheel well real nice but be functional! I was thinking a drag radial that will look nice but I'm not sure of the sizes that will look nice! Can anyone help me with that also

badfbodyz

iTrader: (3)

In a 15x10 you will only be able to buy the a
Alumastar, not the 2.0. But they match well on a race application, and that's how 99% of people run them. I'd get the 7" backspace, and run a 275/60/15 nitto DR

badfbodyz

iTrader: (3)

Here's my weld RTS low pad application. 17x5 with m&h fronts, 15x10 with 7.5" backspace, 275/60/15 Hoosiers. Can get these in all polished as well.