1970 caddy sedan deville(sinister) lq4 s475 turbo cam=)
#164
TECH Fanatic
Thread Starter
#165
TECH Fanatic
Thread Starter
So here is the exhaust installed, took me a little bit to figure out how to hang it, but I think it will work just fine .
Its not touching anything, clearance everywhere (not much in some areas) but I'm not anticipating any rattles(prob just jinxed myself) Check it out!
Bad angle, it does have space between trans heat sheild
Got it as close to floor/frame as i could
You knew ihad to paint it black
Its not touching anything, clearance everywhere (not much in some areas) but I'm not anticipating any rattles(prob just jinxed myself) Check it out!
Bad angle, it does have space between trans heat sheild
Got it as close to floor/frame as i could
You knew ihad to paint it black
#167
TECH Fanatic
Thread Starter
Here is what I did for the hangers, because it's all one piece and space is a premium under the hood and under the car, I was Not going to be able to use these hangers in the traditional way they are designed. Problem is once the exhaust is lifted straight up to The turbo, you can't slide the pipe one way or the other, so bolts were welded in place and the hangers were fastend, and I have removable, rubber hanger exhaust!
#168
TECH Fanatic
Thread Starter
#170
10 Second Club
iTrader: (41)
This build is awesome. I bet the exhaust will be perfect. Good sound, but not to loud. My car is dumped right by the tranny bell housing and it's not that loud. Turbo does a really good job of muffling the noise.. I posted on this over a year ago when you started. You have lot more patience then me. You have to be ready to drive this thing!
#171
TECH Fanatic
Thread Starter
This build is awesome. I bet the exhaust will be perfect. Good sound, but not to loud. My car is dumped right by the tranny bell housing and it's not that loud. Turbo does a really good job of muffling the noise.. I posted on this over a year ago when you started. You have lot more patience then me. You have to be ready to drive this thing!
#175
TECH Fanatic
Thread Starter
#177
TECH Fanatic
Thread Starter
So body work is not on the agenda right now, so pretty much done with this for now. It will save it's purpose, however it's pretty ugly.....
Here is charge side mock up
#180
TECH Fanatic
Thread Starter