1970 caddy sedan deville(sinister) lq4 s475 turbo cam=)
#241
TECH Fanatic
Thread Starter
Thanks alot! It's been a learning experience with the hydroboost stuff, it was getting tempting just to throw the vaccum booster back on it, but in the grand scheme of things I'm glad I made it work
#244
TECH Fanatic
Thread Starter
Well, let me bring something to the table!
This is a simple, solderless way to boost your tach signal
Parts
Slip heat shrink over resistor
Couldnt get any clearer, slip ends of heat shrink inside splice crimp
Signal wire jumped over to 12v power to the tach
This is a simple, solderless way to boost your tach signal
Parts
Slip heat shrink over resistor
Couldnt get any clearer, slip ends of heat shrink inside splice crimp
Signal wire jumped over to 12v power to the tach
#249
TECH Fanatic
Thread Starter
Yea, a friend of mine posted it, he has the red twin turbo colorado, sweet little truck, I'm not on any social media exept tech lol!
I don't know a thing about tuning, and he was kind enough to help me get it going on a base tune, but it has some idle issues and trans shifting stuff to be worked out, I'm hoping to take it to daytona for the turkey run, so we'll see
Its so fun to hear the turbo noises that shouldn't come from this car lol
I don't know a thing about tuning, and he was kind enough to help me get it going on a base tune, but it has some idle issues and trans shifting stuff to be worked out, I'm hoping to take it to daytona for the turkey run, so we'll see
Its so fun to hear the turbo noises that shouldn't come from this car lol
#250
TECH Fanatic
Thread Starter
Got the third nozzle, maybe more for looks at this point, but should help us find the limit one day lol
Last edited by slocaddy; 11-14-2016 at 07:06 PM.
#251
I'm interested in the meth kit . Does it have its own map sensor ? Or does it just need a boost / vacuum line from manifold? I'm thinking of getting the same one and replacing my boost gauge with the vc50 controller .
#252
TECH Fanatic
Thread Starter
This one uses a tiny vacuum line to the manifold, just seemed like the easyiest way to go
#256
TECH Fanatic
Thread Starter
Crunch time, been wrapping up odds and ends, someone is working on a base tune for me .
So ill be using this to monitor some things
New rear meats
So ill be using this to monitor some things
New rear meats