When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I bought a roller ls1 f body. Trying to source together all the front accessories and brackets. Any sponsors sell any package kits or know of anyone who does?
Holley has just released a new tight-tuck low-mount alternator set-up that is configured to provide the same clearances as the stock F-body FEAD. It's actually very affordable if you want to go with all new components...you can find information on it on the Holley website under part number 20-156. Here's an image showing it installed on an LS in a Fox-body Mustang swap project I'm working on at the moment.
Holley has just released a new tight-tuck low-mount alternator set-up that is configured to provide the same clearances as the stock F-body FEAD. It's actually very affordable if you want to go with all new components...you can find information on it on the Holley website under part number 20-156. Here's an image showing it installed on an LS in a Fox-body Mustang swap project I'm working on at the moment.
It will fit a 68-72 A-body when using the Hooker rear-bias engine mounting brackets only; it is not compatible with the 64-67 A-bodies in any instance due to steering box interference that cannot be overcome.