8 pin connector for HP Tuners mvpi pro analog input
#1
8 pin connector for HP Tuners mvpi pro analog input
I'm looking to buy a few of these to integrate into various harnesses I've built, past and future.
I know tick sells them from HPT @ $17 ea. + ship.
Are there any hardware gurus out there that recognize this connector by name?
Thanks
I know tick sells them from HPT @ $17 ea. + ship.
Are there any hardware gurus out there that recognize this connector by name?
Thanks
#3
thanks!
ok I ordered the wrong ones at first and now have the correct ones.
they are available from digi-key electronics for $3.19 each and about $3 shipping, so order a few to make it worthwhile.
the digi key part number is ED10557-ND
it is an 8 position terminal block plug with female sockets and 3.5mm spacing between pins.
ok I ordered the wrong ones at first and now have the correct ones.
they are available from digi-key electronics for $3.19 each and about $3 shipping, so order a few to make it worthwhile.
the digi key part number is ED10557-ND
it is an 8 position terminal block plug with female sockets and 3.5mm spacing between pins.
Last edited by truckdoug; 04-08-2017 at 03:13 PM. Reason: update with correct part number and description
The following users liked this post:
themealonwheels (08-05-2019)