2000 z28 4.8l turbo build
#25
On The Tree
Thread Starter
Join Date: Jun 2005
Location: kingwood WV
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Was going to buy a power steering relocation mount but decided to make it instead
Fits nice next step bolt the pump on
Works great, next step is to move the altenator
Fits nice next step bolt the pump on
Works great, next step is to move the altenator
#26
On The Tree
Thread Starter
Join Date: Jun 2005
Location: kingwood WV
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Made a lower altenator bracket to kick the altenator out, the ear on the top left is to mount the trans cooler line to
Better pick in the correct orientation. The tube at the left bolts to the stock altenator bracket then the altenator swings out and bolts to the bracket in the right
Better pick in the correct orientation. The tube at the left bolts to the stock altenator bracket then the altenator swings out and bolts to the bracket in the right
#27
On The Tree
Thread Starter
Join Date: Jun 2005
Location: kingwood WV
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Getting the air filter pipe to the turbo was kind of tight but worked out nice. I welded a bracket to the filter pipe and installed captured nuts so I could bolt threw the altenator bracket into the filter pipe
Getting closer
Getting closer
#28
On The Tree
Thread Starter
Join Date: Jun 2005
Location: kingwood WV
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
I got a good jump on the exhaust it exits out of the turbo 3.5 inch then I made an oval exhaust thats 2.5x5 inches then goes into the 4 inch that I had previously made
All welded and painted
All welded and painted
#30
On The Tree
Thread Starter
Join Date: Jun 2005
Location: kingwood WV
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
#35
On The Tree
Thread Starter
Join Date: Jun 2005
Location: kingwood WV
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts