Noob44

iTrader: (9)

So I have a nitrous express direct port kit (80009-10) and Im trying to install the nitrous rails on my Holley Hi-ram. I am trying to figure out how to mount the nitrous rails on the intake. I can't find a picture anywhere of this kit installed. I have contacted Nitrous Express but I haven't heard anything back. Do I have to make my own brackets? Thanks for any help guys

Joey

Noob44

iTrader: (9)

Nobody knows? I must be the only one to buy a nitrous kit with rails.

TTur1996

We got those rails. Two sets of them. They are all sitting on the shelf. Plumbed it old school. You have to have those rails machined, and they are a pain to get the plumbing right. And a pain when changing jets too. But that's my opinion. If you need any more. I have 4. And will gladly sell them. Best of Luck.

Just looked at that part number. Didn't know it had soft lines. Ours had hard lines. And in the picture it shows the rails already machined. Ours weren't. Now that's seems like it might be pretty nice. Sorry, but I have no idea how you would mount them. I'm sure there is some way though, at least you would think so.

brandon@nitrousoutlet

iTrader: (2)

That's going to require fabbing up brackets to mount the rails. Below you will see a set of brackets that we created for a customer on a Fast 102 intake.

Noob44

iTrader: (9)

yeah TTur1996, They are machined and ready to go. Just no brackets or anything in the directions on how to mount them. And I can't find anything online on universal brackets or anything. Really frustrating!

Wow Brandon those Brackets are super nice. It looks like those will work for my setup. I would have to turn those so they are facing the fuel rails and maybe add a spacer to raise them a small amount. Do you have these in stock?

brandon@nitrousoutlet

iTrader: (2)

We custom make these to the customers intake. They run $75 per bracket. Give us a call at the shop and we can go over everything with you.