Help an idiot out - hp tuners 3.4 and lm-2 wideband
#1
Help an idiot out - hp tuners 3.4 and lm-2 wideband
Im new to everything hp tuners and hooking up the lm-2 to it.
I used the tuning schools tutorial on adding the lm-2 to the channels. Wired it up to the plug as described in the directions for input 1 and tried input 2 as well. Never could get the numbers to change from 7.36 or so.
What at am I missing here? I'm sure it's something dumb.
I used the tuning schools tutorial on adding the lm-2 to the channels. Wired it up to the plug as described in the directions for input 1 and tried input 2 as well. Never could get the numbers to change from 7.36 or so.
What at am I missing here? I'm sure it's something dumb.
#2
And it's confirmed, I am an idiot.
The output wire connection that plugs into the hp tuners pro wasn't hooked up to the lm-2.
Its not reading but not correctly. So now I need to figure that out.
The output wire connection that plugs into the hp tuners pro wasn't hooked up to the lm-2.
Its not reading but not correctly. So now I need to figure that out.
#3
TECH Addict
iTrader: (4)
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,485
Likes: 0
Received 0 Likes
on
0 Posts
Here's a pic of how to hook it up.
To transform go to Oxygen sensors, Equivalent Ratio, click on your wb, click on Fx icon to bring up user defined. Make change. Once ok is clicked then it comes up automatically.
To transform go to Oxygen sensors, Equivalent Ratio, click on your wb, click on Fx icon to bring up user defined. Make change. Once ok is clicked then it comes up automatically.