Jeasus.....the cost doesn't stop
#41
In fairness some builds go easy, and some fight you. You also need determination and the understanding that once your on the road actually running? You still have a year or so of gremlin chasing in front of you. This process tests the will of all of us and thats why so few realize their dream. Its the inevitable compromising choices we all must make alone the way that you can choose to either accept, or let eat you up. One approach leads to a positive outcome, the other leads to misery, frustration, hate, and you end up becoming a Liberal
Stampede.
#42
TECH Fanatic
iTrader: (8)
Implusiveness inherently leads to massive project cost over runs. Our wagon is a direct victim of this, and we ended up commiting twice what was budgeted for - and we owned the donor car before the project started! Granted the "finished" product is that much more impressive.
On the next build we are simplifying the approach with fewer bells and whistles. But, the spreadsheet is still showing a less than desirable figure. Maybe I should take up knitting?
On the next build we are simplifying the approach with fewer bells and whistles. But, the spreadsheet is still showing a less than desirable figure. Maybe I should take up knitting?
#43
TECH Senior Member
iTrader: (25)
i have ~8 grand in my whole truck including 3 motors, 2 transmissions, HPT tuners, QA1 coilovers,nice wheels and tires, coupla different turbos, vehicle price and paint.
up until paint I was in Joe Nova territory. nice paint is expensive.
yeah you're never gonna build a budget rig when your shopping list has speartech, mast , TSP, Dakota digital , lokar, fast , brp etc on it.
up until paint I was in Joe Nova territory. nice paint is expensive.
yeah you're never gonna build a budget rig when your shopping list has speartech, mast , TSP, Dakota digital , lokar, fast , brp etc on it.
#44
TECH Junkie
iTrader: (9)
What are we talking about? Thats the best question asked me in a while. Same thing we are always talking about; relativity
After all its your dream
your scheme
your car
how far?
up to you
blood and guts
bolts and nuts
imagination
frustration or elation
the road is yours
the maps are plenty
be sure when you're done
your pockets be empty
the mid will full of knowledge
for you have been to college
of dreams turned real
so are they satisfying or are you crying?
thats entirely up to you
After all its your dream
your scheme
your car
how far?
up to you
blood and guts
bolts and nuts
imagination
frustration or elation
the road is yours
the maps are plenty
be sure when you're done
your pockets be empty
the mid will full of knowledge
for you have been to college
of dreams turned real
so are they satisfying or are you crying?
thats entirely up to you
#45
TECH Senior Member
Dude!
You are a poet
and don't know it!
But you do show it!
Just don't blow it....
You are a poet
and don't know it!
But you do show it!
Just don't blow it....
#47
I have $1500 into the 6.0 and 4L80e in this truck. That's engine, trans, accessories, wiring, pcm, mounts, fuel lines, hoses, everything. It's all used or fabricated by me.
Any engine and trans are going to be expensive if you are buying all shiny new parts, doesn't matter if it's a swap or came in it. You can do it cheap if you get creative and find some deals.
Any engine and trans are going to be expensive if you are buying all shiny new parts, doesn't matter if it's a swap or came in it. You can do it cheap if you get creative and find some deals.
Nice Pick Up! What is the Vertical line about a foot from the rear, and there is
another in the front of the bed, just behind Cab 4 or 5 inches?
Looks cool the way it is, are you going to Paint it?
#49
#52
Teching In
Join Date: Jul 2017
Location: Morongo Valley, Ca
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I feel ya, I'm into mine nearly 5k already and it's hopefully nearing the end.. the list is getting smaller.
Scope creep bit me on my blazer build, it went from a 1k coil and link front end to a total and complete strip, cage, beamed, motor build, 2wd swap bla bla bla 3 years and counting...
I feel like the gen IV stuff is still being figured out in some respects, like Cam being one of the few doing the VVT and manual trans thing and we all know the pioneers take the arrows in the ***
Scope creep bit me on my blazer build, it went from a 1k coil and link front end to a total and complete strip, cage, beamed, motor build, 2wd swap bla bla bla 3 years and counting...
I feel like the gen IV stuff is still being figured out in some respects, like Cam being one of the few doing the VVT and manual trans thing and we all know the pioneers take the arrows in the ***
#54
TECH Senior Member
#55
My project is a restoration. My goals were swap an ls with manual in, upgrade the brakes and add better front seats and an OAI hood.
I have since scrapped the manual idea for a 4l80 since they are dirt cheap here. I found near new c6 brakes for 250 and ls1 backing plates for 50. I got an LH6 that needs lifters and a cam for 250. The body work and paint is going to kill me, but I knew that. I did splurge and got the frame blasted and powder coated for 340. I am keeping track and I know the little things are killer.
I have since scrapped the manual idea for a 4l80 since they are dirt cheap here. I found near new c6 brakes for 250 and ls1 backing plates for 50. I got an LH6 that needs lifters and a cam for 250. The body work and paint is going to kill me, but I knew that. I did splurge and got the frame blasted and powder coated for 340. I am keeping track and I know the little things are killer.
#59
TECH Junkie
iTrader: (9)
I feel ya, I'm into mine nearly 5k already and it's hopefully nearing the end.. the list is getting smaller.
Scope creep bit me on my blazer build, it went from a 1k coil and link front end to a total and complete strip, cage, beamed, motor build, 2wd swap bla bla bla 3 years and counting...
I feel like the gen IV stuff is still being figured out in some respects, like Cam being one of the few doing the VVT and manual trans thing and we all know the pioneers take the arrows in the ***
Scope creep bit me on my blazer build, it went from a 1k coil and link front end to a total and complete strip, cage, beamed, motor build, 2wd swap bla bla bla 3 years and counting...
I feel like the gen IV stuff is still being figured out in some respects, like Cam being one of the few doing the VVT and manual trans thing and we all know the pioneers take the arrows in the ***
Yeah I took and still take arrows on the regular. Crazy life
#60
TECH Enthusiast
iTrader: (2)
I thought i could do a swap for $3000. Plus or minus . MAN WAS I WRONG.
6.0 with 4l80 in a 87 chevy truck. I'm pushing $8000.
engine and trans needed rebuilt , all off the shelf parts , no shortcuts.
Shout out to speartech, mast motor sport , Texas speed . Dakota digital , lokar, fast , brp hotrod ,
All that's left now are the $100. Parts here and there.
I don't think there is a end in sight. LoL
6.0 with 4l80 in a 87 chevy truck. I'm pushing $8000.
engine and trans needed rebuilt , all off the shelf parts , no shortcuts.
Shout out to speartech, mast motor sport , Texas speed . Dakota digital , lokar, fast , brp hotrod ,
All that's left now are the $100. Parts here and there.
I don't think there is a end in sight. LoL