Post a pic of your Trans Am/Firebird!
#154
Picked up a 2000 WS6 about a month ago.
6.0 with Trick Flow heads, a 4L80E, and a rear mounted, intercooled, Precision turbo setup...
I've already bought a 2nd set of wheels and tires, lol.
RaceStar Bracket Racers, 15x10 and 15x3.75, w/165/80R15's and 275/60R15 ET Street R's, and a set of...
C5 Z06 replicas, 18x10.5 and 17x9.5, with 275/40, and 295/35R18's
Baby-ing it out of the hole (helped by turbo lag), so as to not break the stock rear, went 10.85@137, w/a 2.000 sixty foot, lol. Started putting money away for a 9" rear and have a 2 step coming for it...
6.0 with Trick Flow heads, a 4L80E, and a rear mounted, intercooled, Precision turbo setup...
I've already bought a 2nd set of wheels and tires, lol.
RaceStar Bracket Racers, 15x10 and 15x3.75, w/165/80R15's and 275/60R15 ET Street R's, and a set of...
C5 Z06 replicas, 18x10.5 and 17x9.5, with 275/40, and 295/35R18's
Baby-ing it out of the hole (helped by turbo lag), so as to not break the stock rear, went 10.85@137, w/a 2.000 sixty foot, lol. Started putting money away for a 9" rear and have a 2 step coming for it...
Last edited by rel3rd; 02-06-2020 at 08:42 AM.
#160
Still fighting with my AC delete panel install ( motor still in) since I'm retaining heat I'm having some alignment issues with the ports coming through. Mostly due to my dumbass, I measured the ports with a caliper but didn't get the flares that are wider so the holes were oversized but not enough. Don't have a bit big enough and im off by................005". I'm gonna do a bit of trimming after taking it in and out repeatedly I've found some spots that aren't user friendly since I know it will come back out some day. Same ol same ol, lots of fighting and little completed. I swear sometimes I want to make a list and drop this ****** off at a shop
Last edited by blackbyrd; 04-07-2018 at 03:28 PM.