Cam Comparison LSL lobes vs...
#43
Super Hulk Smash
iTrader: (7)
Get a shelf grind cam. They use their new CNC machines to cut bulk cam orders. They are typically within .5 degrees. So like BTR or Speed Inc or any of the folks who stock "shelf" grinds of their own design, are cut in bulk orders. And those are well tested. So they work.
If you truly need a custom cam, Cam Motion is the way to go.
#44
TECH Senior Member
#46
TECH Senior Member
There was a problem with lobes scuffing really bad. Suspected bad hardening process.
#47
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
Originally Posted by JakeFusion
Comp uses older machines for one-off custom ground cams. That's why I DO NOT RECOMMEND you get a custom cut Comp Cam. It will be a crapshoot.
Get a shelf grind cam. They use their new CNC machines to cut bulk cam orders. They are typically within .5 degrees. So like BTR or Speed Inc or any of the folks who stock "shelf" grinds of their own design, are cut in bulk orders. And those are well tested. So they work.
If you truly need a custom cam, Cam Motion is the way to go.
Get a shelf grind cam. They use their new CNC machines to cut bulk cam orders. They are typically within .5 degrees. So like BTR or Speed Inc or any of the folks who stock "shelf" grinds of their own design, are cut in bulk orders. And those are well tested. So they work.
If you truly need a custom cam, Cam Motion is the way to go.
#48
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
And keep in mind - i am just one data point. Others had fantastic results with a comp cam and 918 springs.
I want to say over 50% of the cams out there are ground still by comp.
I want to say over 50% of the cams out there are ground still by comp.
#49
TECH Senior Member
Stats are funny that way. As many cams, etc. as Comp has out there, 1% is a number that still gets your attention. And a few bad apples.... well you know the rest!
#51
TECH Senior Member