What's everyone using for an oil pan? Having pressure issues at the track
#21
TECH Apprentice
Join Date: May 2012
Location: Danbury, Ct
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
#22
11 Second Club
iTrader: (3)
I had no issues with the windage tray with the Z06 pickup tube. It cam with the oil pan from Improved Racing.
#23
TECH Enthusiast
#25
TECH Enthusiast
#28
TECH Enthusiast
Can't really go wrong with Improved's $200 baffle insert into the stock pan. You're retaining the OEM pan so you know what it's going to seal like when reinstalled.
#31
8 Second Club
iTrader: (3)
I have the MAST pan. No issues with bearing failures and I have a lot of runs on the car.
The 2nd gen Holley wasn't available at the time.
It holds 6 quarts.
The pickup is near the rear.
The pickup was too close to the bottom of the pan so I moved it up.
Just had the pan off an L99 Camaro. Looks decent.
The replacement engine had an LS3 Corvette pan. Looked better. But depends on what will fit your car!
The 2nd gen Holley wasn't available at the time.
It holds 6 quarts.
The pickup is near the rear.
The pickup was too close to the bottom of the pan so I moved it up.
Just had the pan off an L99 Camaro. Looks decent.
The replacement engine had an LS3 Corvette pan. Looked better. But depends on what will fit your car!
#32
[QUOTE=Nitroused383;19730971]Holley 302-2 or the 302-3 when it's released. Proven to 8500 rpm on the fastest sbe car.[/QUOTE
so cappizi is using one of those pans on his mustang? do you know if he runs extra oil in it was thinking about the 302-3 for my mustang
so cappizi is using one of those pans on his mustang? do you know if he runs extra oil in it was thinking about the 302-3 for my mustang