"How Original".......Billet S480 Fox Body
#83
Overall I really like how the On3 kit mocked up with even a S400 Chassis turbo, Hood just BARLEY doesn't clear to the point where it won't take much at all the hood pin hole is about 3/4 exposed so talking 1/8th of an inch and were in there. All I plan on doing is either getting a extension type deal so I can use a coupler or may just have that one cold side pipe modded to bolt on with the V-band.
But did find this
The Previous owner of this car just leaves me with surprise after surprise. Looks like he didn't want to swap a set of 50 dollar heads and decided to just JB weld off his failed attempt at getting an exhaust bolt out
#90
Here's the pump set up with the Y and everything mocked up, Question is on filters pre pump I have 2 outlets on my cell so the way I'm going to do it is feed both pumps with their own feed from the cell, I plan on running the diesel type fuel filter post pumps but was curious as to what you guys would run pre pumps with these AEM 380's that isn't going to be restrictive
#95
XRP makes this but it's for the 044 and with the check valves already (If they ever become a restriction they will be removed) I see this as maybe being a restriction if they made them in the -10AN threads
#97
TECH Fanatic
#99
Got the car tore down to swap heads and only got one head gasket lol
Also got the extension flange for the S400 frame
Here is what I’ll be using for wiring it’s 5 relayed circuits with harness to run to accessories then 5 to the switches as well has 5 constant 12V sources nice piece it’s all already put together and labeled.
2 steps forward 1 step back
Also got the extension flange for the S400 frame
Here is what I’ll be using for wiring it’s 5 relayed circuits with harness to run to accessories then 5 to the switches as well has 5 constant 12V sources nice piece it’s all already put together and labeled.
2 steps forward 1 step back