When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Damn, that's impressive, I kind of laughed when you had the mufflers and wheels ready and the rest of the car was junk at the beginning. You proved me wrong in a hurry!.
The guy that built this car has a shop and posts on some of the Facebook groups. Next time I see him post, I will try to remind him to update this thread
Can you tell me if there is access for mice to get into the rocker panels from behind the front fender/wheel well. I see you had the front fenders off of the car but I was unable to determine by looking at the pictures if such a hole exists. Mice have made there way inside my 99 Camaro and I haven't been able to figure out how. Any suggestions would be greatly appreciated. Thanks
Here are some pics I took after removing my front fender liner. It looks like they can get into the space in the door jamb, but not below. There is one area where the air goes into two holes and out a larger rounded-rectangular hole. I thought it was enclosed, but it is possible there is a passage a mouse could use to access the rocker.
Thanks for the help guys. Those pics from eb110americana give me a much better idea of what is behind the wheel liner. I will have to remove the wheel liner and try to fish a wire from inside the car through a hole in the sill to see if it leads to the holes outside. I removed the blower motor because I thought they might be getting in through the cabin air intake. No sign of mice there though. I have a hole eaten through my headliner down into the car from above. We are going to figure this out!