Throttle linkage with 4500 TB
#1
Throttle linkage with 4500 TB
I’m having some problems with trying to get my Wilson 4500 TB adjusted just right on my new setup. I have a lokar throttle cable with a lokar gas pedal. I have tried all different combinations of adjustments from the throttle cable adjuster nut, to sliding the cable bracket holder back and forth on the bracket. I can either get 100% TPS but the blades will never fully close, the best I can get is like 15% closed. Or I can get it to fully close the throttle but it will only go to like 85-90% full throttle. Here’s some pictures of what I’m working with. If anyone can give me some input I would greatly appreciate it.