When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
PSJ no **** LOL! I moved back to port 2 years ago! Just never changed my location. I'm on bridge rd, Let me know if you need an extra set of hands, I absolutely love this ****!
PSJ no **** LOL! I moved back to port 2 years ago! Just never changed my location. I'm on bridge rd, Let me know if you need an extra set of hands, I absolutely love this ****!
First want to thank Preston (MungFace) for letting me grab the puller to yank these motors apart the harbor freight one just wasn’t too fond of the shitty little impact we got but what he loaned me worked perfect
Got the L33 cleaned up and slammed my cam and lifters in it from the iron motor
Got the fuel system figured out after fighting the -10 Back there I just fed each pump their own -8 should be more than enough to support 800-900 wheel on e85
studs and heads are in and on got a set of 853s with some Tick .660 springs
After you get everything nail down and the car running let me know how you like your Holley system, I'm considering selling my FITECH kit and going with the HP. Also, where are you going to mount your trans cooler? I'm looking for ideas not sure if I want to put it in the back, under the driver's side, or in the front. Nice work so far.
04-03-2018, 01:41 PM
