Did I crossover to the dark side? (Square port porn inside)
#261
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Good to know. I’m going to try a scaled tune first to see if I can stop it from maxing out the air flows
#271
ModSquad
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Street cars don’t need parachutes...kidding.
Can’t wait to see numbers!
Can’t wait to see numbers!
#275
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
little bit of an update. I had a bad Holley harness right out of the box that kept us chasing our tails for a while. A buddy of mine had a spare harness that he isn’t using yet, so we tried it out to see if that was the problem. And it was. So shout out to Nathan at Holley. He’s already got me a replacement on the way and I’m sending back the defective one.
Also got the throttle body/cable issue resolved. The car came with a lokar gas pedal and where they had the throttle cable coming through the firewall too far away from the gas pedal. Soooo we drilled a new hole about 5” lower and closer to the pedal. Bam, problem solved. So it’s finally time to start ironing out the tune on it!
Also got the throttle body/cable issue resolved. The car came with a lokar gas pedal and where they had the throttle cable coming through the firewall too far away from the gas pedal. Soooo we drilled a new hole about 5” lower and closer to the pedal. Bam, problem solved. So it’s finally time to start ironing out the tune on it!
Last edited by blk00ss; 03-24-2018 at 09:05 PM.
#280
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
She looks good! You done awesome on her.