startingstock

iTrader: (3)

Like the title says. I'm new to nitrous. I have an engine management system and am ready to spray. Like today.
Just don't know what I need. I've done a lot of reading and my trigger finger is itching. I was ready a year ago and life put things on hold. I'm good to go now though. Any vendors want a sale?

G Atsma

Try Nitrous Outlet. They do everything nitrous, and will steer you to what you need.

HCI2000SS

iTrader: (2)

I use Nitrous Express and am totally happy with it. Any reason why it has to be a dry kit?

startingstock

iTrader: (3)

Thank you. I've heard of all of them, I was just figuring I'd roll the dice and go with the first vendor that responded(If anyone did).

startingstock

iTrader: (3)

I have about 200 hp left on my injectors and have the holley hp edu. So just figured I would let it do the work.

HCI2000SS

iTrader: (2)

What size shot are you looking at?

tug686spd

iTrader: (11)

What intake set up you running? Are you looking for direct port, plate or nozzle kit? 200 hp could be done for cheap if you have the Holley.

startingstock

iTrader: (3)

150 tops. Strictly street. I have about 450 hp and if I We r to bump fuel pressure a bit, I'm thinking I can get 150 out of the injectors with some head room for safety. The only other injectors for my throttle body are 210s! Compared to the 80s I have now. Plus I never go to the track, so I'd never be able to put it on the ground.

startingstock

iTrader: (3)

The cheapest. Probably nozzle for now. I have a single plane team g. If distribution becomes a.problem, I'll probably get a plate. I just did the intake swap, so I'm not ready to tap it for direct port yet. Plus the xtra $$

tug686spd

iTrader: (11)

Can't remember what functions the hp has for nitrous. But if it's a single plane 4150 intake only looking to spray 150-200. I'd be getting a $75 ebay perimeter plate, feed line in length you need, any small n20 noid, 12" line from noid to plate, cap on fuel side of plate in case plate leaks, heater and switch and a new or used bottle.

curtisad

iTrader: (4)

I use a dry fogger from Nitrous Outlet and I am perfectly happy with it.

98redorangeta

iTrader: (10)

If you are looking dry and you have holly Efi it’s hard to pass up the value on a single stage direct port from Nitrous Outlet.

http://www.nitrousoutlet.com/direct-...ngle-rail.html

If you want just a super basic kit you can get that for pretty cheap but for an extra couple hundred bucks you get a lot of room to grow.

'68LT1camaro

iTrader: (1)

https://www.dynotunenitrous.com/stor...?idproduct=118

brandon@nitrousoutlet

iTrader: (2)

With the Holley, a dry direct port system will be a breeze. Here's a picture of one that we plumbed up for a customer using the Holley.

pantera_efi

iTrader: (1)

Hi SS, I help Dave at Water Thunder in Melborn, FL., my customer

He is the fastest Air Boat, uses NOS, wins the races.

The ONLY requirement is the Tank, Solenoid, line for a dry system.

I can provide these items, I like Nitrous Supply, Mike Thermos.

Lance 949-250-1797

startingstock

iTrader: (3)

I don't have the money for something like that right now. Budget is key for me. 3 kids and counting. Plus I just swapped the intake. It has no2 casting bungs, but I'm not really looking to lull the intake off. It has 150 miles on it. I'm just looking for a single nozzle or plate kit. Clearance is at a premium vertically, so a plate might not work without modification. I already ordered the holley progressive solenoid driver. So I'm kinda leaning toward a single nozzle kit with the best spraying nozzle(If there is such a thing) for best distribution. Something that will cover entire 4" intake tube. I attached a couple pics of what I'm working with

baronsmith98

iTrader: (2)

Nitrous Outlet Dry stinger plate. That joker will hit like a ton of bricks

startingstock

iTrader: (3)

I appreciate the advice. But I think those plates r like $300 by themselves? I'm trying to stay around $500. And I don't k ow he tall they are, but my carb hat is almost kids g the bottom of my hood scoop. I'll be getting a single nozzle kit tomorrow. It seems like it's the best route for me to stay on budget and not have clearance issues. But, I do have a question. Since I'm on speed density, should the nozzle be placed as far up stream as possible? Thanks for the suggestions BTW.

brandon@nitrousoutlet

iTrader: (2)

http://www.nitrousoutlet.com/x-serie...us-system.html

This will spray up to 200hp. Just stab the nozzle into that tube going to your elbow and let her rip.

startingstock

iTrader: (3)

Thank you Brandon. I will order that right now. It will be the one going to Jupiter Florida.