FS or trade: Big Block 496 third gen 10.40's on motor!!
FS or trade: Big Block 496 third gen 10.40's on motor!! Gauging interest in my car.
427 tall deck .060" over, 4 bolt mains
-Probe Industries 496ci stroker kit: cast steel crank, light weight 4340 racing rods, forged domed pistons (10.2:1)
-Dart Pro1 Aluminum heads 325cc
-Weiand Team G intake
-Holley HP 950cfm
-Crane Solid Roller .615"/.636" 245/254 110 lobe separation, Isky roller lifters, Comp Pro Magnum Rockers, Moroso stud girdle
-Be Cool Radiator, Spal fan, high flow pump
-March Pulley set
-MSD Digital 6 box, MSD distributor, Blaster 2 coil, Taylor 10.4mm wires
-Summit hi-torque mini starter
-Aeromotive fuel system-A1000 fuel pump and regulator, all braided lines and fittings, Competition Engineering fuel sump
-Ford 8.8" rear, Koni coil over shocks fully adjustable, four link setup, Superior 31 spline axles, Eaton Posi, 3.55 gears installed with extra set of new 3.73's, Trick Flow rear girdle, Spohn adjustable panhard bar, disc brakes *ALL COMPLETELY CUSTOM*
-Dynamic Racing Transmissions TH400 race tranny with Edge Racing Converters 9 1/2" 3400 stall converter, custom 3" driveshaft, Spohn crossmember, Moroso deep race pan
-B&M ratchet shifter
-Hooker Headers ceramic coated
-Weld Draglites 15x5 and 15x10 with BFG 325/50/15 drag radials
-Autometer Sport Comp Silver gauges, custom Painless Wiring switch panel
-Taylor Battery Relocate
-4 point roll cage
Receipts for many other parts...
EVERYTHING is new. Interior is in good condition, needs minor things to complete. There is less than 1000 miles on the entire drivetrain.
Car was dynoed in November 2004, and made 463rwhp and 588rwtq on pump gas with a safe, rich tune. Car went 10.46@130 only time at the track all motor.
The picture showing the side of the car was taken last year before the new wheels and tires. I just wanted to show the quality of the paint.
$12,000 OBO
I have to commute to school now, so now i'm looking for either an ls1 or even a decent cummins/duramax pickup. This car is the real deal, it runs and drives excellent.
427 tall deck .060" over, 4 bolt mains
-Probe Industries 496ci stroker kit: cast steel crank, light weight 4340 racing rods, forged domed pistons (10.2:1)
-Dart Pro1 Aluminum heads 325cc
-Weiand Team G intake
-Holley HP 950cfm
-Crane Solid Roller .615"/.636" 245/254 110 lobe separation, Isky roller lifters, Comp Pro Magnum Rockers, Moroso stud girdle
-Be Cool Radiator, Spal fan, high flow pump
-March Pulley set
-MSD Digital 6 box, MSD distributor, Blaster 2 coil, Taylor 10.4mm wires
-Summit hi-torque mini starter
-Aeromotive fuel system-A1000 fuel pump and regulator, all braided lines and fittings, Competition Engineering fuel sump
-Ford 8.8" rear, Koni coil over shocks fully adjustable, four link setup, Superior 31 spline axles, Eaton Posi, 3.55 gears installed with extra set of new 3.73's, Trick Flow rear girdle, Spohn adjustable panhard bar, disc brakes *ALL COMPLETELY CUSTOM*
-Dynamic Racing Transmissions TH400 race tranny with Edge Racing Converters 9 1/2" 3400 stall converter, custom 3" driveshaft, Spohn crossmember, Moroso deep race pan
-B&M ratchet shifter
-Hooker Headers ceramic coated
-Weld Draglites 15x5 and 15x10 with BFG 325/50/15 drag radials
-Autometer Sport Comp Silver gauges, custom Painless Wiring switch panel
-Taylor Battery Relocate
-4 point roll cage
Receipts for many other parts...
EVERYTHING is new. Interior is in good condition, needs minor things to complete. There is less than 1000 miles on the entire drivetrain.
Car was dynoed in November 2004, and made 463rwhp and 588rwtq on pump gas with a safe, rich tune. Car went 10.46@130 only time at the track all motor.
The picture showing the side of the car was taken last year before the new wheels and tires. I just wanted to show the quality of the paint.
$12,000 OBO
I have to commute to school now, so now i'm looking for either an ls1 or even a decent cummins/duramax pickup. This car is the real deal, it runs and drives excellent.
Last edited by crazycamaro496; Jul 15, 2005 at 05:47 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo You can buy a 10 sec street car no doubt 9's on the bottle for 12k!!! Don't let this one get away. All the work is done guys, I can vouch for the car and there will be no disappointments here. Lets hear what you guys have for ls1 trades!!!
responses sent.
it's easier to get in touch with me by email: crazycamaro454@aol.com or by phone at (860)420-9141. that's my cell, so feel free at any time. i'm up all hours, more than likely on here.
thanks
it's easier to get in touch with me by email: crazycamaro454@aol.com or by phone at (860)420-9141. that's my cell, so feel free at any time. i'm up all hours, more than likely on here.
thanks
