top of the line Lt1 for sale 1000+rwhp(FI set up)

well i have decided to sell off my f body stuff and buy a Zo6.

the motor is brand new never run and has all brand new parts inside.
im sure someone will make a fuss about the title saying 1000+rwhp when i have never started the motor. if you know anything about the setup you know its well capable of 1000rwhp.

this motor is almost the same as the one in the worlds fastest lt1 (bigrick's) he ran 8.0x at 17x mph. some of the parts on this motor are actually better than on his.

I was going to go after the worlds fastest t56 f body record with this setup in full street trim. if you had this motor in a car setup for the track you could try and go after the worlds fastest lt1 record.
besides trying to go for the worlds fastest t56 fbody record i was going to drive this car on a semi daily basis. i would drive it everyday but i commute out of town everyday and wouldnt want to put tons of miles on the car.


the motor was built by B&B performance
displacement is 400 ci b=4.051 s= 3.875
callies racemaster crank
oliver billet 6 in rods
custom ross pistons -23 cc coated
billet maincaps
block has been O-ringed
AFR 215 Raised runner heads (best lt1 head you can get) ported by B&B they flow into the 330s and the buyer can have all the flow specs.
72cc chambers on the heads
cr of 8.8:1
copper head gasket
intake valve 2.125
exhst valve 1.625
valves are ferrea super alloy
comp 943-16 pacalloy (sp?) springs (cryogenicly frozen)
custom billet sollid roller cam from cam motions (specs to buyer)
crower solid roller loffset lifters
crower offset stainless shaftmount rockers
intake is a victor jr converted for fuel inj. fuel rails are from wilson manifolds.
polydyne coatings: piston tops, comb chambers. exhst ports, valve faces, bearings
custom made sheetmetal valve covers
very nice looking flexible oilpan dipstick tube (dont rememebr the brand, im sure if your interested in the motor your not to concerned about the brand of the dipstick though lol)
moroso oil pump
canton 7 qt pan
it is setup so it would be great for a blower also. it has a bbc crank hub on it and a custom timing chain cover to accomidate it.

the buyer will get the build sheet for the motor.
click here for a few pics

there is around $18,000 in this motor. its brand new and has top of the line parts.
i will sell the whole thing for 10k firm
i will sell the top end for 5500 firm
i will sell the bottom for 5k (i will not sell the bottom before the top)

if you have anythign i could use on a z06 i may consider trades.

brook

enloe

 

link here

email me if interested

brook

 

replied to pm's

brook

 

Will you sell just the heads and rocker arms?

 

Hey Brook,

I didn't get a change to read the entire thread. Will you part it out? How much for the heads?

Raymond

 

i will part it as a top end and bottom end.

all the parts onthe top end are very spacific to this setup so i dont want to split up the top end.

brook

 

To the top for ya' Brook.

Raymond

 

thanks raymond


brook

 

sorry id like to keep the top end togeather, all the parts are needed if you run those heads and it would be hard to sell some it seperately

brook

 

ttttt

 

ttttt

 

do you really need 2 threads for the same thing?

 

what other thred are you refering to? theres only one for this in the FS section that i keep updated. this is listed in some old threds in this section but ive made new ones and let them just sink to the bottom.
i do have this posted in other sections that are related to this item (lt1 section, and FI section)
and if your referign to the thred in those sections the answer is yes, i do need it there too.

brook

 

ok i just found out abotu what your talking about...

someone else moved the thred here. i didnt post 2 in this section. i didnt even know it got moved untill now.
brook