I have a stock LS1 Shortblock that came out of a 98 Camaro SS. The engine has about 90,000 miles on it. It was running good when it was pulled. Asking 700.00 for it.

I also have an LS1 shortblock that came out of my 00 WS6. It will need to be rebuilt. I had piston to valve contact and it busted the #5 piston and bent the rod. But I have a good set of rods that I got off Ebay that I will throw in for FREE. The engine will also need to be resleeved as well. 250.00/obo.

I also have a set of TEA stage 1.5, 5.3ltr heads. The springs are Comp 940s. They have been milled about 15 thousanths I believe it was. So they cannot be used with cams bigger than .600 lift unless using pistons with valve reliefs cut in them. They have also been O-ringed so they would be good heads to use with N20. These heads made 437 to the tires with a mild cam and all the bolt-ons in my 6 speed car. 850.00

 

Are the crank and rods any good? How much to resleeve an LS1 block? I have read it is not the same as sleeving a regular sbc.

 

I know the piston that is busted had a bent rod. I do not believe the crank is hurt. For 25.00 I will throw in a set of good rods that I got off Ebay. And I'm not sure how much it would cost to get it resleeved, but yes you are correct it is different than a regular cast iron block.

 

I modified my original post on the bad shortblock to include the info about the rods because honestly I had forgotten about the bent rod.

 

I will check around to see if any of the local places would be able to sleeve an LS block correctly, if so, I might take it.

 

Cool let me know...

 

Bump, come on people surely someone needs this stuff...

 

Bump Prices lowered

 

To the top

 

Engines are still for sale.... Heads are pending sale.

 

Heads are sold!

 

PM sent

 

will you do 700 shipped for 98 ls1? 92584 is zip i can paypal right away

 

Let me check and see what shipping would be... I bet its going to be pretty expensive to Cali. But I'll check.

 

cool let me know.

 

Shipping would be so expensive I'd hate to lose that much money AND have to hassle with shipping. I wouldnt mind losing money if someone picked it up. Sorry man...

 

Still got the 98 block.

 

hey i can do $800 shipped. if that helps..let me know. if not i totaly understand just throwing out an option.

 

pm sent...

 

shipping on the 98 ls1 to 78415 tx