FS:TFS Heads, FAST ,Headers ,Wheels,tools
FS:TFS Heads, FAST ,Headers ,Wheels,tools 
SLP headers and y-pipe $300+ shipping SOLD
Trickflow 215 Heads , Harland sharp rockers and TFS p-rods $2900 shipped less then 100 miles
TFS cam 220/224 cam $225 shipped
FAST 90/90 w/FAST T/B ,fuel rail ,AN lines $1300 shipped SOLD
Snowflake wheels 16" (2) $100 shipped
Alpinestar motorcycle jacket (size 48) $250 Shipped
GTO black out Taillights w/harness $100 Shipped
SLP line lock (solinod only) $40 shipped
Hurst sidewinder **** Brand New $45 shipped
New valve cover gaskets 5.7 L $50 for both
1 5/8 Flycutting tool $100 Shipped
Fender roller (eastwood) $200 Shipped
Stock injectors from 98 SS $40 shipped USPS
Stock pulley $40 shipped USPS
LS1 intake $50 + shipping
98 TB stock $60 shipped
Gray T-top shades $80
Paypal + fees on stuff over $100
Last edited by CamaroSS19; Nov 24, 2007 at 02:49 PM.
I am interested in the 90/90. The kit has everything in it:
- 10 lb bottle
- Blowdown tube and fitting
- NX remote bottle opener
- Fully automatic bottle heater with transducer
- Electric dyno tune bottle pressure gage with sender
- 860 bottle bracket for Fbodies - mounts in spare tire well
- Nitro Dave's 4-switch panel - mounts in console
- Nitro Dave's custom all-in-one solenoid bracket - attaches to front of head near TB
- Nitro Dave's 78mm plate kit - mounts between intake and TB - the best one out there
- Cold Fusion in-line nitrous filter
- Fuel pressure safety switch
- Multi-port fittings for the LS1 fuel rail - allows attachment of fuel line to solenoid, FPSS attachment, and another opening for a fuel pressure gage
- NX carbon fiber fuel and nitrous solenoids
- NX purge kit with carbon fiber solenoid
- Trick dual stage window switch with integrated throttle position sensor and selectable gear lockout
- Jets
- NX Bottle Blanket
- All braided lines needed to plumb the kit
- All relays and switches needed
If you are interested in it, send some pics of the 90/90 setup to mjmcmillin@yahoo.com. Also, where are you located?
- 10 lb bottle
- Blowdown tube and fitting
- NX remote bottle opener
- Fully automatic bottle heater with transducer
- Electric dyno tune bottle pressure gage with sender
- 860 bottle bracket for Fbodies - mounts in spare tire well
- Nitro Dave's 4-switch panel - mounts in console
- Nitro Dave's custom all-in-one solenoid bracket - attaches to front of head near TB
- Nitro Dave's 78mm plate kit - mounts between intake and TB - the best one out there
- Cold Fusion in-line nitrous filter
- Fuel pressure safety switch
- Multi-port fittings for the LS1 fuel rail - allows attachment of fuel line to solenoid, FPSS attachment, and another opening for a fuel pressure gage
- NX carbon fiber fuel and nitrous solenoids
- NX purge kit with carbon fiber solenoid
- Trick dual stage window switch with integrated throttle position sensor and selectable gear lockout
- Jets
- NX Bottle Blanket
- All braided lines needed to plumb the kit
- All relays and switches needed
If you are interested in it, send some pics of the 90/90 setup to mjmcmillin@yahoo.com. Also, where are you located?
I am interested in the 90/90. The kit has everything in it:
- 10 lb bottle
- Blowdown tube and fitting
- NX remote bottle opener
- Fully automatic bottle heater with transducer
- Electric dyno tune bottle pressure gage with sender
- 860 bottle bracket for Fbodies - mounts in spare tire well
- Nitro Dave's 4-switch panel - mounts in console
- Nitro Dave's custom all-in-one solenoid bracket - attaches to front of head near TB
- Nitro Dave's 78mm plate kit - mounts between intake and TB - the best one out there
- Cold Fusion in-line nitrous filter
- Fuel pressure safety switch
- Multi-port fittings for the LS1 fuel rail - allows attachment of fuel line to solenoid, FPSS attachment, and another opening for a fuel pressure gage
- NX carbon fiber fuel and nitrous solenoids
- NX purge kit with carbon fiber solenoid
- Trick dual stage window switch with integrated throttle position sensor and selectable gear lockout
- Jets
- NX Bottle Blanket
- All braided lines needed to plumb the kit
- All relays and switches needed
If you are interested in it, send some pics of the 90/90 setup to mjmcmillin@yahoo.com. Also, where are you located?
- 10 lb bottle
- Blowdown tube and fitting
- NX remote bottle opener
- Fully automatic bottle heater with transducer
- Electric dyno tune bottle pressure gage with sender
- 860 bottle bracket for Fbodies - mounts in spare tire well
- Nitro Dave's 4-switch panel - mounts in console
- Nitro Dave's custom all-in-one solenoid bracket - attaches to front of head near TB
- Nitro Dave's 78mm plate kit - mounts between intake and TB - the best one out there
- Cold Fusion in-line nitrous filter
- Fuel pressure safety switch
- Multi-port fittings for the LS1 fuel rail - allows attachment of fuel line to solenoid, FPSS attachment, and another opening for a fuel pressure gage
- NX carbon fiber fuel and nitrous solenoids
- NX purge kit with carbon fiber solenoid
- Trick dual stage window switch with integrated throttle position sensor and selectable gear lockout
- Jets
- NX Bottle Blanket
- All braided lines needed to plumb the kit
- All relays and switches needed
If you are interested in it, send some pics of the 90/90 setup to mjmcmillin@yahoo.com. Also, where are you located?
Sorry kind of just need the money
Pics of the heads added
